Protec VCI Wax Coat
PRODUCT CODE
P-319
PRODUCT DESCRIPTION
Protec Wax Coat
PRODUCT INTRODUCTION
P-319 Protec Wax Coat is a time-proven coating that provides excellent protection to metal substrates exposed to harsh outdoor conditions. Protec P-319 leaves a firm, wax-like film that can be removed by mineral spirits or alkaline cleaners such as Protec P-302.
Description
| PARTICULAR | DETAILS |
|---|---|
| Type | Firm, wax-like |
| Appearance | Dark brown viscous liquid |
| Coverage | 300-330 ft2/gal @ 3 mils (7-8 m2/l @ 75 microns) |
| Dry Film Time | 12-24 hours Drying to Touch Time 0.5-3 hours Film |
| Packing | Protec P-319 is available in 350 ml Spray, 5 gallon (19 liter) steel pails, 55 gallon (208 liter) metal drums, totes, and bulk. |
| Removal Method | Petroleum solvents Carrier Mineral spirits |
| Viscosity at 23°C | 600-5,000 cps (6 rpm) Spindle #2 |
| VOC | 2.9-3.1 lb/gal (347-372 g/l) |
| Density | 7.4-7.7 lb/gal (0.89-0.92 kg/l) |
| Shelf Life | 24 Months |
| Properties | Flexible Excellent salt spray protection Excellent outdoor protection,Multimetal protection, Excellent UV resistance,Moisture displacing, Cured film is heat stable up to 392°F (200°C) Conforms to MIL-PRF-16173E (Grades 1 and 2) |
| Applications | Pipe coating,Parts storage,Underbody coating,Wire rope,Steel plate,Machined parts |
PROTECTION PROPERTIES
| ASTM | DFT | Carbon Steel (1010) | |
|---|---|---|---|
| Salt Spray | B-117 | 2-3 mils (50-75 microns) | 900-1500 hr. |
| Prohesion | G-85 | G-85 4-7 mils (100-175 microns) | 2000 hr. |
| Humidity | D-1748 | 2-3 mils (50-75 microns) | 2500+ hr. |
APPLICATION
Protec VCI P-319 Wax coat be applied by brushing or spraying. A film thickness of at least 2-3 mils (50-70 microns) is recommended for uncovered outdoor storage.
Note: These are typical figures and variations in these characteristics may occur.
We believe that the information given is accurate and is offered in good faith but without any guarantee. Since conditions of use are beyond our control. The user assumes all risks of use. The recipients of this test report must make their own evaluation of the workplace risk. This product shall be stored, handled and used in accordance with good industrial hygiene practices and in conformity with any legal regulation. The information contained herein is based on the present state of our knowledge and is intended to describe the product from the point of view of safety requirements. It should not therefore be constructed as guaranteeing specific properties.
